The AuRü ÖP – Oil Protector
The oil protector is the standard among drip pans. The simple containment system consists of a 35 mm high stainless steel drip tray with an integrated mechanical separator and four stainless steel mounting feet. The system allows a refrigeration system to be installed outdoors. If the oil protector contains light liquids, such as ether oil, these are retained by the integrated oil separator in accordance with legal requirements.
The standard oil protector
The basic version of our standard oil protector is available in ten different versions, which differ in terms of size and collection volume (1.2 to 5 l). We can also produce special sizes for you on request.
| Standard size Type |
Dimensions (H x W x D in mm) |
Collection vol. (in liters) |
|---|---|---|
| AuRü ÖP 1 | 35 x 320 x 900 | 1,20 |
| AuRü ÖP 2 | 35 x 400 x 950 | 1,50 |
| AuRü ÖP 3 | 35 x 500 x 1150 | 2,30 |
| AuRü ÖP4 | 35 x 850 x 1140 | 3,88 |
| AuRü ÖP 5 | 35 x 930 x 1140 | 4,25 |
| AuRü ÖP 6 | 35 x 780 x 1500 | 4,70 |
| AuRü ÖP 7 | 35 x 1200 x 1500 | 5,40 |
| AuRü ÖP 8 | 35 x 850 x 1430 | 4,90 |
| AuRü ÖP 9 | 35 x 590 x 1250 | 3,00 |
| AuRü ÖP 10 | 35 x 850 x 1750 | 5,00 |
As a standard product, the AuRü ÖP has a separator system that provides adequate basic protection. The separator has a leaf guard and a drain guard and also allows the integration of the high-performance heating block (HHB). If you opt for one of the variants listed above, you will receive a mounting set in addition to the stainless steel drip tray, which is suitable for floor mounting and consists of four C-feet on which the oil protector can be placed
AuRü ÖP consisting of
Separation system
The separator system is designed for small systems and offers adequate basic protection. The separator has a leaf guard and offers the option of integrating the high-performance heating block (HHB). The separator includes a drain nozzle.
Mounting kit
For standard sizes, you will receive a mounting set suitable for floor mounting with the drip tray.
It can also be combined with the AuRü wall bracket, which you can purchase as an optional accessory.
The mounting set consists of four C-feet and two locking screws, on which the system can be variably mounted.
Optional accessories for the AuRü ÖP
We also offer a wide range of useful accessories for your oil protector to further increase its functionality. These include various heating systems: a high-performance heating block (HHB), which is inserted into the separator and measures the water temperature in the collection system using a thermostat, a heating mat with an external thermostat or a surface heating system. The latter is particularly advantageous when using heat pumps. It prevents condensation from dripping into the tray system and freezing immediately when it comes into contact with the tray, or an ice layer forming in the tray. Also available is our special Flex-O-Frame system – optionally with ball joint – with which you can easily adapt the drip tray to local conditions.
High-performance heating block
The high-performance heating block (HHB) is inserted into the separator and heats it directly in the separator system itself. The heating block is therefore securely installed and impact-resistant. The heating element uses its integrated thermostat to measure the temperature of the water in the collection system.
Heating mat with external thermostat
We offer heating mats as a cost-effective solution. They are glued under the tub and heat it optimally through contact with the tub. We recommend insulating the heating system to prevent heat loss.
Surface heating
Surface heating with Heat-Master control makes particular sense when using heat pumps. Condensation that accumulates in winter drips into the tray system and freezes immediately on contact with the tray. This creates a punctual ice cover in the tub, which can spread upwards. Surface heating prevents this. The sophisticated system works via a water level sensor and water temperature sensor for energy-efficient operation.
Wall bracket
The wall bracket, in conjunction with the mounting set included with standard sizes, is an ideal addition if a system including security system is to be mounted on a wall. This console is statically designed for standard refrigeration and air conditioning systems and heat pumps, so that you can also mount your system on the console.
